Virtual inspections available

Garage Cracked Walls

A residential garage with settlement issues causing cracked walls

Over 60 years experience
50 year product warranty
Licenced Builders
Certified Australian Resin

Symptom:

A single-storey brick veneer dwelling showing evidence of subsidence in the garage.

Resinject were engaged by the property owner to determine why their garage was suffering from cracked walls. When the site was investigated by the Resinject team, it was identified in the building plans that the dwelling was a “cut & fill” site.

The garage of this residential dwelling was constructed on uncompacted fill, which was determined to be the route cause of the settlement issue causing cracked walls.

Solution:

Resinject designed an injection program for the property using our deep inground injection method, injecting our specially formulated expanding polyurethane at varying depths throughout the injection program.

In doing this we were able to achieve 10mm of lift in the compromised area, by achieving 10mm of lift, we re-levelled the area as well as gaining significant closure on the step cracking in the garage brickwork. The project was completed within a 4 hr period and achieved a fantastic result.

Before

After

Resinject protects the structural integrity of homes, buildings and Infrastructure. If you’re concerned about your home or business, we’d love to hear from you!

Book a FREE inspection today or call Resinject on (02) 4062 8731

View Recent Projects from Resinject

Residential Chimney and Internal Walls

Symptom: Resinject were engaged by the property owner to determine why they were experiencing internal cracking on their chimney and internal walls.  On inspection, it was discovered that the property was subject to poor drainage as well as the stormwater downpipe that was dissipating straight into the ground as opposed to being connected into the
Learn more
13 September, 2021

Residential Garage

Symptom: A single-storey brick veneer dwelling showing evidence of subsidence in the garage. Resinject were engaged by the property owner to determine why their garage was suffering from cracked walls. When the site was investigated by the Resinject team, it was identified in the building plans that the dwelling was a “cut & fill” site.
13 September, 2021

Industrial Cello Factory

Symptom: Resinject were engaged to stabilise and re-level the concrete floor that had been compromised. These affected internal slabs were pumping and deflecting with forklift activity in the warehouse, causing a potential risk to both handling equipment and operators. Solution: We injected our Australian made and owned Polyurethane resin down to different depths to stabilise
13 September, 2021

Caltex Service Station

Symptom: This Caltex service stations high traffic area was showing evidence of subsidence and voidage. This would suggest that it could be due to excessive storm water, unsealed slabs or inefficient storm water drainage impacting on the re-active soils beneath the slab. Our principle aim was to consolidate the ground, improving the load bearing capacity,

Save money and act sustainably